Ampere Pro 1.47 Final Apk

Rate this post

Ampere Apk Download

Ampere Pro v1.47 Final Apk

Needs: 2.3+

Needs: 4.0+

Did you ever before felt, that one Charger/USB cable television collection fees your gadget really fast as well as the various other not? Now, you can show this with Ampere.
Action the charging as well as discharging current of your battery.
The application works with Android 4.0.3+ gadgets. Not every gadget is supported since there are gadgets which does not have an ideal measurement chip (or the user interface) as well as they could not be assisted in any way. Please check out the listing of not sustained phones at the end of the description.
The application is not suggested to be mA precise. It is simply helpful for evaluate which Charger/USB cord combo is functioning the most effective for you on the same device.
Beginning the app and also hesitate ca. 10 seconds (“measuring” is on the display screen). After this time, the asking for or releasing existing will certainly be revealed.

The present relies on several things : 

  •  The charger (USB/AC/Wireless).
  •  The USB cable television.
  •  The phone type.
  •  Current tasks running.
  •  Present brightness.
  •  WiFi state.
  •  GPS state.

Kindly don’t make use of the readings on this app as concrete science. Nonetheless, the readings suffice to relatively gauge exactly how different battery chargers as well as USB cords reasonable on the exact same gadget.

If your Lollipop device (or later) shows 0 continuously, please use the settings choice “Old measurement method”. You could require the app with it to make use of the aged measurement user interface, if the Lollipop device has at the very least one. Possibly it assists.

Sadly some Samsung gadgets do not offer correct (gauged) values (e.g.: S5), merely the maximum feasible charging current with the real USB cable/charger configuration. This is a firmware issue.

Concerning alert as well as background measurement :

  • The dimension works in the background just if you turn on the alert in the setups.
  • You can hide the notification symbol by establishing the notice priority to minimum.

Background information: The application measures the charging/discharging current of the electric battery. If your phone is not connected to a battery charger, you see the discharging present which is unfavorable. If you link a wall charger after that the existing just what the battery charger provides will certainly be used to provide your phone and the staying power will certainly be charged right into the electric battery.
If your phone consumes 300 mA without a wall charger attached (-300 mA on the screen), after that a 500 mA wall charger will charge your battery optimum with 200 mA existing (200mA on screen).

Technical details: The displayed current is an average value from 50 measurements minus the 10 upper worths as well as the 10 reduced worths. The presented current could be shaky or unpredictable or perhaps simply zero meanings that, that the Android system offers such unstable values. Every firm uses different electric battery types and other equipment making it hard to get precise results regarding your wall charger.

LiPo batteries don’t attract the maximum for the full time it takes to bill the phone. If your electric battery is demanded nearly complete after that the billing current will certainly be much less as by lesser electric battery degrees.
A chart explaining LiPo cost stages:
Dave’s (EEVBlog) LiPo Charging Tutorial:

Phones/ROMS appropriate only with “Old measurement approach” turned on and also chosen the right “Dimension user interface”:.

  • HTC One M7/ M8.
  • Phones/ROMS reported to be not dealing with this app:.
  • Galaxy Grand Excellent – fortuna3gdtv.
  • Galaxy Note2 – t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos.
  • Galaxy S3 – d2att, d2spr, d2vmu.
  • Galaxy Tab4 7.0 – degas3g.
  • HTC Desire 510 – htc_a11ul8x26.
  • HTC One S (ville), X (endeavoru), XL (evita).
  • HTC Sensation 4G – pyramid.

Kindly do not give incorrect score, if your phone is just one of the above. Not the app is incorrect, however your phone does not sustain this sort of dimension yet.
If the app doesn’t work with your tool with pre-Lollipop Android version, then kindly check out the first and the second blog posts in this XDA designer forum thread: Please post your issue with screenshots in the XDA string.


  • v1.47:.
  •  New: Setting option for “Conceal alert otherwise demanding” added.
  •  Different minor pest fixes.
  • If the gauged value is constantly 0, kindly attempt to use the “Old dimension technique” and/or the “Measurement interface” establishing options (if readily available).
  • If your tool reports “Not Charging” as opposed to “Discharging” make use of the “Boosted Measurement” establishing choice.

This application has no advertising campaigns.

More Info At Play Store

Download Ampere Pro v1.47 Final Apk

Direct Download

PRO features Unlocked

Related Post


Previous App ««

»» Next App

You Might Also Like